Dual Fuel Range Cooker With 13amp Plug
Are you a home chef who appreciates the nimble heating control of gas cooktops but wants an electric oven for baking? Discover a dual-fuel range cooker that gives you the best of both worlds.
Gas cooktops are the preferred choice of many home chefs who have experience in the kitchen due to their superior temperature control. They also allow the use of advanced cooking techniques such as grilling. These cooktops can be costly though, especially if you require an additional gas connection and electrician to install it.
What is a 13amp plug?
If you own a dual fuel range cooker (also called an electric and gas oven) is required, you'll need an appropriate 13 amp plug. The plug should also be hard-wired by a licensed electrician into the cooker ring.
This ensures that the current passing through the plug is secure and not too high which could create an electrical fire risk. The current is controlled by a fuse in the plug. The fuse will blow as soon as it is deemed to be overloaded. This protects the appliance from an overload of electricity.
The fuse is rated 13 amps, as shown on top of the plug. This indicates the maximum amount of current the plug could carry without damaging the appliance or heating the socket. It is crucial to ensure that when replacing fuses, you always use the same rated amps as the original. There is a risk of overheating a socket if you replace a fuse with a different rating.
A 13 amp fuse will be a ceramic one that is extremely durable and is able to withstand high temperatures generated by a range cooker. Ceramic elements are also resistant to fire and therefore a better choice than other kinds.
There are a variety of ways to install a 13 amp plug. It may be wired to an existing live socket, and the flex is connected to it by a screw or plastic jaw-type cord clamp. The plug is then placed in a secure position and tightened, ensuring that the cord clamp is secure.
Some plugs may have a diagram of wiring on cardboard over the pins, and these must be removed prior to connecting the wires. The wires must be trimmed to the proper length, as when they are too long they could be crushed when plug covers are changed. The earth wire must be the longest to connect it before the neutral and line pins.
How do I fit an outlet with 13amps?
The majority of dual cookers that use fuel in the UK are equipped with an amp rating of 13 amps. This is vital since ovens draw substantial current, while standard plug sockets only have a 10 amp rating.
Generally speaking, new appliances must be fitted with an outlet at the time of purchase and it is part of ensuring compliance with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances might not be connected to a plug and this is where the problem arises.
The first thing to do when connecting a cooker with an existing plug socket is to make sure that the rating of the fuse in the fuse box is similar to that of the plug. This is very important because a fuse that is not properly sized could pose a risk.
It is also recommended to ensure that the fuse is fully seated in the cartridge, and there isn't any movement. The next step is to prepare the flex to be used. Remove the sheathing to expose the three conductors insulated. Next nick the sheathing at the entry point to the plug (beyond the cord grip) using a knife, but without damaging the individual insulated conductors. This nick should be wide enough that the sheathing can split and then expand when it is pulled back revealing the cable beneath. Cut off the excess sheathing leaving a little more than 40mm over the flex.
The flex is positioned over the plug with the earth terminal at the top and the neutral and live terminals at the bottom. The sheathing on each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then secured to the terminal by with the help of the cord grip. If the plug has an screw-type clamp for cords, loosen this and then pull back the insulation to reveal the copper conductors. Connect each wire that is insulated to the correct terminal using the plug's channel. Start with the earth conductor and then the neutral and finally the live.
What is the maximum draw of a 13 amp plug?
The maximum power draw of the 13amp plug is 3kw at 230 volts. This is a significant amount of power, but the standard fuse fitted in the UK plug will not fail until the cable has heated to a dangerous level. visit this website link damaged plug or socket could cause fire, therefore it is important to be aware of how much you are using particularly in the kitchen.
The ceramic fuses used in plugtops measure around 25mm in diameter and are designed for mains voltage of 240V. The fuses will have an BS Kitemark or similar mark on the side and they'll contain sand. Glass or plastic alternatives are available, but should not be used in conjunction with a live plug.
Most dual fuel range cookers sold in the UK need to be hard-wired and will not plug directly into a wall socket. They are usually connected using a separate cooker circuit that is only suitable for appliances that can handle up to 20 amps.
Check the ring circuit of your home using the fuse box, or call an electrician nearby. They will be able to inform you whether the sockets in your home are on the same ring or separate and if there is a dedicated circuit for your oven.
If you're considering buying a new dual fuel range cooker the size of your kitchen is an important factor to take into account. We have a wide selection of cookers to suit any space, including compact 50-60 cm dual fuel models, as well as massive 90cm+ double oven options from the top brands such as Rangemaster and StovesAreUs.
We also have a wide variety of multifunction gas and electric cookers. These multi-functional appliances let you cook a variety of dishes such as curries, casseroles, and pasta!
Explore our entire range of Cookers in Currys online or head in-store for a look. We provide free delivery and home installation on selected range cookers and we also offer flexible payment options. Our team is available to answer any questions you may have. Contact us via email or phone. Credit is subject to status and terms & conditions apply.
What is the most draw for the switch on a cooker?
There is plenty of confusion over what the maximum current draw of a cooker switch is. The truth is that most cookers aren't designed to connect to the standard socket, but instead are hard wired and connected to a specific oven ring circuit. This is due to the fact that they typically consume more than 20 amps of power when both the gas and electric ovens are used.
There aren't any dual fuel range cookers that are able to be fitted in standard sockets, since this could pose a significant fire risk and violate electrical regulations. An experienced electrician will install any new electrics to the kitchen cooker and will make sure that the total load (both the hob and oven) will not exceed the supply capability of that circuit.
Dual fuel range cookers mix the ability to cook with the sensitivity of a gas stove and the precision and precision of an electric oven. This is why they're popular among chefs and home cooks alike. If you are looking to experiment with different cooking techniques such as searing and charring, a dual fuel range cooker is the perfect option.
When you are looking to purchase a new range cooktop, you must consider several factors, including size, functionality, and price. You will also require gas connections in your home to allow the appliance. If you aren't sure then book a Gas Safe engineer to inspect your home prior to installing.
Currys dual fuel range cookers are available with a variety of models to suit all budgets. From affordable models from Indesit and Zanussi to our own Essentials collection. If you're looking for something a little more advanced, we also stock a wide selection of premium JennAir ranges, featuring several new features.
When you purchase a new dual fuel range cooker, it is important to check the owner's manual for specific details on the electrical and gas requirements. You will need to ensure that your home has a gas hook-up that is suitable, and you may need to get a plumber to install it for you if necessary. You may also need a cooker-ring circuit that is installed by a certified electrical engineer.